In addition to their beauty, Brass Baron fountains are readily portable and easy to install.

Three elements are required for installation:

• The fountain sculpture... is plumbed with copper tubing with a hose barb welded to the tubing at the bottom of the sculpture.
• The receptacle to hold water... can be of any non-pours material large enough to receive the water emitting from the fountain sculpture.
• A submersible, recirculating pump... draws the water from the pump submerged in the receptacle through a plastic hose attached to the hose barb on the fountain sculpture. The water runs through the copper tubing inside the sculpture and flows back into the receptacle, thus providing a continuous flow of recirculating water. The pump's electrical cord is plugged into a grounded 3-prong outlet.